Lead Cutting and Forming Machines

Product Details:

Our organization has been recognized as one of the trusted names engaged in manufacturing, trading and importing a quality-assured range of Scienscope Inspection Systems, Scienscope Microscope, Screw Tightening Equipment, Electric Screwdriver, SMT Splicing Solution, In Circuit Tester, KAIT Soldering Oven, PCBA-SMT Machines, Lead Cutting and Forming Machines, BGA Rework Station, SMT Equipment Solution, Multi Function Tester, Label And Tape Dispenser, Soldering Station and much more.

Product Details:

Features:

• Motorized Operation with safety sensor
•  Automatically sends the PCB board using rotating upper blade
•  Sending of the board is activated by Engage Gear & Release gear operation.

Product Details:

Features:

• Apply for Loose fuse and Axial lead component sleeve with Shrinkable tube,Teflon forming.
• This machine adopted programmable Logic Controller(PLC) to carry out the electronic drive and integrates with high-precision mechanical movement to complete feeding, sleeve, shrink,forming and cutting. 
• With function making correction for the component lead deformation
• High accurate forming and easy to change die set 
• System structure is compact, easy operation and maintenance.

Product Details:

HEDA 801A V Cut Moving Blade PCB Separator is used where high cutting accuracy is required with minimal human movement of the PCBA. It separates the PCBA by using V-cut method.

Equipment characteristics:

• Crystal, capacitance, resistance and other parts can be processed, which can be matched with various forms of mold;
• Forming feet cut convenient operation of a complete;
• Small volume, easy replacement of the mold, the mold up more than 200 kinds of products
• Knife mould are used Japanese imports of steel, long service life, easy maintenance;
• Can be customized according to customer requirements of die.

Features:

• Prevents stress on the PCB components
• Prevents cracks in soldering
• Blade angle adjustment provided to meet appropriate V-cut depth

Product Details:

Specifications:

• PCB materials requried: Could cut aluminum,Copper,FR4 PCB,
• PCB length: No limitation.(could customized according to customer demand)

Feature:

• Small capacity and easy to operate. High safety
• Adopt the multi-blade style. It is totally three steps to cut and minimize the stress. It is the best machine for minimizing the stress still now .
• Blade materials imported from japan with long lifetime and high strength.
• Speed is adjusted could meet the mass production.

Product Details:

Product Details:

Features:

• This machine integrates power-driven and big precision mechanical movement to complete the electronic shaping and forming.
• Forming is accurate and precise. The lead length and shoulder width can be adjusted.
• Accepted mold and clamp customized according to customer demand.
• System structure is compact and efficient, easy to operate and maintain.
• Forming machine and vibrating disk can be separated or combined.
• Accepted customizing for the spectification of electronics and materials.

Product Details:

Features:

• Automatically feeding with the function of stop automatically when the material is fully or shortage
• Positioning by special dividing device ensures high stability

Product Details:

Features:

• This machine is programmble control using standard power. It intergrates high precision mechanical movement and air-driven action to complete the feeding of LED, Component shaping, polarity testing, switch direction cutting of legs and forming automatically. .
• Operation consist of panel button and human-computer interface. Parameter can be changed , easy opertaion and simple.
• System includes emergency stop, automatic counter, ans trouble alarm.
• Forming is accurate. Mold can be changed.
• System structure is compact and efficient, easy to operate and maintain.
• Accepted customizing.

Product Details:

We design nozzles and clips to fit different odd components according to different shapes for easy replacement to secure high-speed inserting.

Product Details:

Product Features:

• Suitable for mass production.
• Kinds of resistors, diodes can be used.

HEDA-804 Automatic Loose Radial Lead Cutter is suitable for various kinds of fixed carbon film resistor, metal film resistor and diode cut, bending forming, any shape can be to design processing is currently the most excellent resistance machine

Product Details:

Equipment characteristics:

• The whole of the 1 foot excellent function, suitable for any IC pin pitch;
• Do not change track, all the knob adjustment;
• Save time, increase the mating efficiency;
• Power operation, maintenance cost;
• Roller type, whole foot;
• The operation is simple, suitable for mass production.

Additional Information:

• Item Code: HEDA-803

Product Details:

Features:

• One machine could installed three die set. Could choose the mold movement by switch without manual.
• Automatical feeding with function of stop automatically when material is full or shortage.
• Automatically do the positioning by special dividing device,insureshigh stability.

Product Details:

Features:

• Automatic material feeding system, Fully automatic without manpower;
• Easy to adjust Length from 2.5/5-3.5mm without change mold;
• Small dimensions, light, canvenient saves energy, low cost, casy to earn back the machine cost;
• Special feeding system without damaging the wire. Easy adjustment and Mainetnance.

Product Details:

Heda-828A, is a hand-held model with automatic screw feeding and locking system. This machine, reduces labour job of placing the screw in the socket to lock it. It is a handy machine for high volume production units, where labourers do the screw placing & tightening manually, which is very time consuming.

Features:

• Easy operation with automatic screw feeding system in the screw driver.
• It is a fast process, as it saves time of placing the screw by the worksmen physically before tightening. Also avoids smucking of the job work.
• Adjustment & locking is very precise and accurate.
• Low noise level.
• Features like, quantity counting of screws & screw shortage alarm, keeps operator alert.

Product Details:

Features:

• Apply for loose/taped resistor and led component forming.
• This multi-function machine can fulfill forming F/U Shape through changing die set or relative parts on one machine. 
• It could form different shape and size only through changing die set. Easy and fast.
• Adopt the one-off cutting style and
• Promise the component forming size is accurate and stable 
• With pre-pressing function to solve the problem causing By pressure(can be customized) 
• With function of removing taped, it could solve the lead shortage problem. 
• Equipped with function to emergency stop,Manual/Auto, Trouble alarm.

Product Details:

Features:

• Equipped with a standard mould die set & cutter as per client’s requirement.
• Applicable to all kinds of taped radial components.
• Forming cutting completed at the same time.
• Customers can request molding die& easily replace the old die set at their end.
• Adjustable speed
• Automatic feeding.
• Easy to adjust, Easy to operate, Easy to Maintain
• Precise accuracy
• Steel used is Japanese imported steel which ensures high durability & long service.

Product Details:

Equipment characteristics:

• Applicable for taped axial lead forming
• Easy adjustment, stable quality
• Suitable for bulk resistance or diode crystal parts forming with the;
• Suitable for mass production, simple operation;
• Easy adjustment, stable quality;
• Molding cut foot once completed, the processing ability;
• The tool used Japanese imports of steel, long service life, easy maintenance;
• Adjust the speed stepless speed change according to the state of parts. Explain. Resistor forming machine of K type and D type (flat) Suitable for processing belt type: HEDA-807A-DZ

Product Details:

Features:

• This machine is programmble control using standard power.
• It intergrates high precision mechanical movement and air-driven action to complete shaping and forming.
• Forming is accurate and precise. The lead length and shoulder width can be adjusted.
• Accepted mold and clamp customized according to customer demand.
• System structure is compact and efficient, easy to operate and maintain.
• It can be additional equipped vibrating disk for feeding to realize automatical forming
• Accepted customizing for the specification of electronics and materials.